RIFD module(JMY608G)

JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to read and output the card data. JMY608 is reader module with USB interface (HID standard). In the systems of Windows, Linux and other PC systems support USB keyboard, the reader imitates the USB keyboard to operate the card data. With our software and DIP switch, the users can set the reader if to read the number of the card or the data of the card or both. And the data can be positive sequence output or be reverse order output. Meanwhile the users can choose freely the key output such as enter, tab and so on after the output of the number and the data of the card. The default of the JMY608 is configuration mode in factory setting. If you want to let the reader work, you need cofigurate it through the software and input the configuration information to the reader.

    Qualifications:
     Model number:JMY608G
     PCD: NXP RC400
     Working frequency: 13.56MHz
     RF standard: ISO15693
     Operating distance: 100mm
     SAM card slot: no
     Interface: USB (HID standard)
     Power supply: DC5V
     Power consumption: 180mA
     Dimension: 123mm×88mm×25mm
     Weight: about 100g
     Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
     Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)