Save The Webpage | Make As Homepage | Browse
Common Member

Changzhou Wantai Electrical Appliance Co.,Ltd

wantmotor2012

Product Categories
  • Category Unavailable
Site Search
 
Friendly Links
  • Link Unavailable
Current Location:Home Page » Products » motor & driver & power supply
motor & driver & power supply
Click For Large Image
product/Service: Browsing Times:1024driver 
Type: 57BYGH115-003 
Brand: Wantai 
Unit Price: 100.00USD/1 
Minimun Order Quantity: 1 1 
Total Supply: 100 1
Deliver Deadline: Once finish the payment 3cargo will be delivered in days
Update Date: 2012-05-20  Period Of Validity To:Long Term Validity


«Last Product     Next Product»
Detail Information
 This item includs:

3 pcs Nema17 Stepper Motor single with 53.8oz-in holding torque

3 PCS Stepper Driver with 1.7A DQ420MA replacing M415

1 pc power supply  for 100W,24VDC

1 PC DB25 Breakout Board & 1 Cable for free offering

Technical Specifications:

1.Stepper motor

Part No.:                           42BYGH801

Frame Size:                     NEMA17

Step Angle :                     1.8 degree

Voltage :                           12V

Current:                            0.4A

Resistance :                    30mh/phase

Holding torque :              38N.cm /  53.8OZ-IN

Rotor inertia:                    68g-cm2

Detent torque:                  280g-cm

Number of wire leads:    6

Length:                            48mm

2.stepper motor driver

DQ420MA stepper motor driver  with 1.7A peak current,12-36VDC ,128 Microstep,replacing M415B

Introduction:

DQ420MA is a type of two-phase hybrid stepping motor driver, the drive voltage of which is from 12VDC to 36VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 20mm to 42mm outside diameter and less than 2.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor to run smoothly almost without noise and vibration. Holding torque when DQ420MA driver runs at high speed is also significantly higher than other two-phase drivers, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.

Features:

1.    High performance, low price

2.    Average current control, 2-phase sinusoidal output current drive

3.    Supply voltage from 12VDC to 36VDC

4.    Opto-isolated signal I/O

5.    Over-voltage, under voltage, over-current, phase short circuit protection

6.    8 channels subdivision and automatic idle-current reduction

7.    8 channels output phase current setting

8.    Offline command input terminal

9.    Motor torque is related to speed, but not related to step/revolution

10. High start speed

11.    High holding torque at  high speed

1.Electrical specification:

Input voltage

12-36VDC

Input current

< 2A

Output current

0.44A- 2.83A

Consumption

Consumption:40W; 

Temperature

Working Temperature -10~45℃;

Stocking Temperature -40℃~70℃

Humidity

No condensation, no water droplets

gas

Prohibition of combustible gases and conductive dust

weight

70G

3.Breakout board

 

1)       Built in DB25 male connector.

2) DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.

3) DB25 Input Pin: P10,P11,P12,P13,P15.

4) DB25 GND Pin: P18-P25.

5) Power supply: +5V DC.

6) Built in C-class Optical-coupler.

7)        High quality with Surface-mount Tech.

total0条  Relative Comment