The machine is designed to simulate analog products packaged in different edges , angles , surfaces at different heights falling on the ground , and thereby understand the impact strength of the product and to assess the damage at the time of packaging components that can be affected by the fall , thus improve packaging.
Drop test report/Feature
1.Test items placed on the wing platform ;
2.Selected some good placement : corner , triangular , hexagonal way to fix it ;
3.Set drop height , you can simply set on the ruler scale ;
4.After determining a good height , cast solenoid valves, test items left arm in an instant wing free fall .
Technical parameters:
Technical parameters:
Model |
AS-DT-150 |
Max. Weight of Test Samples (Kg) |
100 |
Height of Drop (mm) |
300~1500 |
Max. Dimension of Test Sample WxHxD (mm) |
1000x800x1000 |
Falling Floor Size WxHxD(mm) |
1700x50x1200 |
Drop Method |
Face, edge, angle |
Test Bench External Dimension WxHxD (mm) |
1700x2700x1200 |
Weight(Kg) |
600 |
Product Features :
1.Automatic monoplane design, electric shrink arm acceleration is greater than 7g, guarantees freedom of pallets and packaging isolated specimen , specimen packaging to achieve free fall , shock vibration, stable and reliable, is truly complete face, edge , corner drop test .
2.electric reset, drop and electric lift electronic control device,easy to use
3.with digital height indicator and a high degree of tracking using the decoder , which can give accurate product drop height,drop height and the default error does not exceed 3% or 3cm
4.Motor fault protection,high and low limit protection,emergency stop protection