Click For Large Image
Drop tester/Technical indicators1.specimen maximum weight : 2Kgf about 100g
2.Drop Height : 300 ~ 2000mm ( or customized )
3.the drop height scale : stainless steel , the smallest indication 1cm
4.drop floor media: marble slabs , steel , cement board
5.the bottom plate Size : 500*600*20mm
6.using air pressure : 0.5Mpa
7.machine size : W700* D900 * H2500mm
8.Machine weight : 80kg
9.Power : 1 , 220V, 5A
Drop test report/Structural features
This machine adopts pneumatic lifting structure , will be placed in the test piece special fixtures ( adjustable stroke ) clip firmly press the drop button , cylinder release , the specimen will be free fall tests. Drop height can be adjusted up or down , together with a high degree of scale can be that the specimen drop height . The key components of this machine are reliable Japanese origin , many drop flooring are available to meet different testing standards
Meet the standard : JIS C 0044 IEC 60068-2-32
How it works:
Led to the lifting cylinder fixture ( gas finger ) dropped the phone grip, rising gas release your finger , the phone into a free fall sports , then double-acting telescopic cylinders push the phone supreme position of the clamp can grip , lift the cylinder driven fixture ( gas finger ) dropped the phone grip, rose , birch open air fingers , mobile phones into free fall sports , and so forth until the set number of times . [aslitesting.com]
Drop test system/Technical parameters:
1.Phone down tester Drop height : 70 ~ 150mm adjustable
2.Phone drop way down test machine : Pneumatic
3.Test stations: three stations
4.Drop the phone down tester Views: 0 ~ 20 times / min can be set
5.Impact Flooring : A3 iron
6.Phone down test machine control : PLC touch screen control
7.Phone down tester Power: 220V/50HZ